UXDE dot Net

Download Snowbreeze 2.9.7 To Jailbreak iOS 6/6.0.1 iPhone iPad iPod Touch (Guide)

By -

The popular jailbreaking tool for Windows has been updated. You can now download snowbreeze 2.9.7 to jailbreak iOS 6.0 and iOS 6.0.1 for iPhone, iPad and iPod touch. Simply download snowbreeze from the link below and follow the guide on jailbreaking iOS 6/6.0.2 for snowbreeze.

snowbreeze iOS 6 logo

Download Sn0wbreeze 2.9.7 To Jailbreak iOS 6

iH8sn0w the developer behind the famous jailbreaking tool has updated snowbreeze 2.9.7 to jailbreak the latest version of Apple’s firmware that is iOS 6 and iOS 6.0.1. But we should note here that this is a tethered jailbreak and only for A4 devices.

Those of you have iPhone 4S, iPhone 5, iPad 2/3/4 can not be jailbroken on this version of snowbreeze, this is because no low level bootrom exploit has been found. Before you attempt to jailbreak this make sure you read the notes section below and follow the guide on jailbreaking iOS 6 using snowbreeze 2.9.7

Snowbreeze Jailbreak Notes

This is a tethered jailbreak so you will need to use iBooty to boot tethered (except iPhone 3GS old bootrom)

Added 6.0 (10A403)/6.0.1 (10A523) support. (Only includes iPhone 3GS & A4 devices).

SAM is built-in for iOS 6 hacktivations. (Hacktivated phones can reboot to a semi-tethered state after being activated [rather than just hang at the Apple Logo])

The following devices are supported on snowbreeze 2.9.7

  • iPhone 4
  • iPhone 3GS
  • iPad 1
  • iPod touch 4G
  • iPod touch 3G

Downloads Required

Jailbreak iOS 6/6.0.1 Using Snowbreeze

STEP 1: Download Snowbreeze from the above link and start it.

STEP 2: Click on the blue arrow and drag or use browse button to select your iOS 6 or 6.0.1 IPSW file.

STEP 3: After you have selected your .ipsw file, Snowbreeze 2.9.7 will identify it.

STEP 4:

After it has been identified, select “Expert Mood” followed by “Build IPSW”

(If your iPhone relies on a unlock, proceed only by selecting “Baseband Preservation Mode” option instead of “Expert Mode”)

STEP 5: Click on the Blue button to continue, it will start building custom firmware.

STEP 6: After completing custom firmware process it will display a done message

STEP 7:

Enter DFU mood by following the on screen instructions

  • Hold Power and Home buttons for 10 seconds
  • Now release the Power button but continue holding the Home button for 10 more seconds
  • Your device should now be in DFU mode

STEP 8: After correctly following the instructions, it will display a message that your iPhone, iPod touch, iPad is in Pwned DFU state.

STEP 9Start iTunes, click on your iOS device icon from the sidebar in iTunes. Now press and hold Left “Shift” button on the keyboard and then click on “Restore”.

STEP 10:

Now you don’t need to do anything, just let iTunes work its magic. iTunes will now complete restore process. After the installation it will reboot.

Congrats you have successfully jailbroken your iPhone 4,3GS, iPod touch and iPad on iOS 6/6.0.1

Tethered Mood Boot

As currently there is no untethered jailbreak for iOS 6/6.0.1, so you will have to boot your iOS device into a tetheredjailbroken state.

Here’s How To Do It:

STEP 1: Start iBooty and select your iOS device.

STEP 2: Click the Start button and follow the on screen instructions to enter in to DFU mood.

STEP 3:

  • Hold Power and Home buttons for 10 seconds
  • Now release the Power button but continue holding the Home button for 10 more seconds
  • You device should now be in DFU mode

STEP 4: After you have completed the DFU mood instructions, your iOS device will be booted in a jailbrokentethered mood on iOS 6 or iOS 6.0.1

There you go folks, you will have a jailbroken iOS device on iOS 6/6.0.1.

CEO & Founder of Maypalo You can find Farhan on , and .

7 Comments to Download Snowbreeze 2.9.7 To Jailbreak iOS 6/6.0.1 iPhone iPad iPod Touch (Guide)

  1. Wen I switch to d dfu mode n launch iTunes my device isn’t visible in the left side bar..what to do??
    N do we also need a Internet connection for that?

  2. plspls help my everytime i try to recover with the ipsw that snowboot has created it says ‘unknown error (3194)’ what should i do?

Leave a Reply